[Company Logo Image]  

5X5-V UPRIGHT PANEL SAW
Home Up

     [Product Image]   [Product Image]   [Product Image]   [Product Image]  

 

 


[Product Image] 

5X5-V PANEL SAW
GENERAL INFORMATION

The beam carriage of the 5X5-V is identical to all  the Series- a precision machined 5X5 structural  beam supporting a cast iron carriage with 12 bearing blocks. A counter balance weight has been added for additional safety and ease of operation. The system, similar to other 5X5 saws, is located at the floor line to facilitate maintenance and lubrication. Limit switches and controls are also the same, with the magnetic controls and air "trio" in a convenient position at the rear of the all steel fabricated base which constitutes the super-structure of the entire machine.

MODEL: 5X5-V PANEL SAW

 

SPECIFICATIONS

bullet(Subject to Change Without Notice)

Table Size of 99 Capacity:

Spindle Size (equipped with 6" saw collars)

Center Section

48"

Standard

1"

L.H. Extension

48" x 45"

Beam Size (structural heavy wall tubing)

5X5

R.H. Extension

48" x 75"

Saw Motor (TEFC, 3Phase)

10 H.P.

Floor Area Required

180" x 66"

Type of Carriage Feed

Chain

Headroom Required

Carriage Feed Works

  

(99" capacity Machine)

13ft. 7 in.

(standard Equipment)

A.C. Drive

Fences ( R.H. or L.H. model optional )

Carriage Speed (A.C. Drive)
 

72" to left

Variable Forward

0 to 120 FPM

108" to right

Return Speed

120 FPM

Counter-balance Weight

Furnished

(Other Speed Ranges Available)

Fence Height above Floor

28"

Shipping Weight of Basic 99 Capacity Machine

Depth of Cut with 16" Blade

23/4

Approx.

5100#

Length of Cut...........................Models up to 122"

EXTRA EQUIPMENT & 
ACCESSORIES
AVAILABLE

Spindle Speed (direct drive motor)

3450 RPM

 

 

Home Up

 

Contact Dale Sossman, A & S Machinery (562) 921-3266 or E-mail: asmachy@aol.com
Send questions or comments about web site to  bcturner@cal-fxmedia.com  
Copyright © 2006 A & S Machinery, Inc.
Last modified: February 08, 2006